Samyung ENC NCD-2256, Instruction Manual

Page: 154 / 192

128
Chapter 9 MAINTENANCE AND CHECK
Alarm Name Class Description
TT(Lost)
Alarm TT is lost.
GPS(Error)
Status Failed to set GPS.
GPS(HDOP)
Caution Received excessive HDOP value beyond the setting.
TM Reset
Status For TM, the own ship position is out of 40% of the radius of PPI.
Max Point
Status Exceeded the maximum number of marks.
In Preparing USB
Status
Checking the dedicated folder or create the dedicated folder to
the USB memory.
USB Ready
Status USB memory is available
File Not Found
Status File does not exists.
USB Memory Not Set
Status USB memory does not exists.
File Read Error
Caution Failed to load the file.
File Write Error
Caution Failed to write the file.
Not Enough Space
Status Insufficient capacity.
In Formatting USB
Status The format of the USB memory.
USB Format Finish
Status Format of the USB memory is complete.
Format Error
Caution Failed to format
Num of files Over
Caution
Writing data to the USB memory in which the number of the file
has reached to the maximum.
File Erase Error
Caution Failed to delete the file
TT(Max Target)
Status
Manually acquired when the number of acquisition reached
maximum.
Detected when DSP tries to acquire 11 targets or more. DSP
notifies the maximum target alarm occurrence of automatic
acquisition tot the TT process task, then the TT process task
notifies it to the alarm task.
Range Scale Limit
Status Operations functionally restricted for certain range.
Off center operations in range where off center is not available.
TM setting operations in range where TM setting is not available.
High Latitude
Status Operations for the position of latitude 80 degrees or more.
MOB input.
Event mark input.
Input/moving marks.
Input/moving/inserting lines.
Creating latitude/longitude alarm area.
Invalid Version
Status Program is loading a file with an incompatible version.
Internal setting
Marks/lines
Option languages
STC curve
TT(Out of Range)
Status TT is too far to be tracked.
Self Test NG
Caution Diagnosis NG.
Timed TX
Status Start transmission in timed TX mode
No Rotation
Status Start transmission without antenna rotation