ManualsAndTutorials
www.manualsandtutorials.com
From Offical Samsung Page. All right reserved.
SAMSUNG XPRESS SL-M2022
| User Guide
Shared Key:
Authentication is used. A device that has a proper WEP key can access the network.
Encryption:
Select the encryption (None, WEP64, WEP128).
Network Password:
Enter the encryption network password value.
Confirm Network Password:
Confirm the encryption network password value.
WEP Key Index:
If you are using WEP Encryption, select the appropriate
WEP Key Index
.
The wireless network security window appears when the ad hoc network has security enabled.
Select
Open System
or
Shared Key
for the authentication and click
Next
.
WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each
packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key.
8. The window showing the wireless network setting appears. Check the settings and click
Next
.
Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set
to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting
should also be Static.
If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address.
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in the
Wireless Network Setting Confirm
window. If it shows Static, click
Change
TCP/IP
to change the assignment method to
Receive IP address automatically (DHCP)
.
For the Static method
If the IP address assignment method is Static, check if Static is shown in the
Wireless Network Setting Confirm
window. If it shows DHCP, click
Change
TCP/IP
to enter the IP address and other network configuration values for the machine.
For example,
If the computer’s network information is as shown follows:
IP address: 169.254.133.42
Subnet Mask: 255.255.0.0
Then, the
machine’s network information should be as below:
IP address: 169.254.133.
43
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
Gateway: 169.254.133.
1
9. The
Wireless Network Setting Complete
window appears. Click
Next
.
10. When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click
Next
.
11. Follow the instructions in the installation window.