2. Product Specifications and Description
2.2.4.4. Fuser
This unit consists of Heat Roller, a Thermostat, and Thermistors, etc. It fuses the toner that was transferred by the transfer
roller onto the paper, by applying pressure and high temperature to complete fusing process.
1)
Thermostat
When a heat lamp is overheated, a Thermostat cuts off the main power to prevent over- heating.
•
Thermostat Type : Non- Contact type Thermostat
•
Control Temperature : 195
℃
± 5
℃
2)
Thermistor
It is a temperature detecting sensor.
•
Temperature Resistance : 7 (180
℃
)
3)
Heat roller
The heat roller transfers the heat from the lamp to apply a heat on the paper.
The surface of a heat roller is coated with Teflon, so toner does not stick to the surface.
4)
Pressure roller
A pressure roller mounted under a heat roller is made of a silicon resin, and the surface also is coated with Teflon. When a
paper passes between a heat roller and a pressure roller, toner adheres to the surface of a paper and is permanently fused.
5)
Halogen Lamp
•
Voltage : 120 V (115 ± 5 %) / 220 V : 230 ± 5 %
•
Capacity : 850 Watt ± 42.5 W
6) Items for safety
Protecting device for overheating
•
1st protection device: Hardware cuts off when overheated
•
2nd protection device: Software cuts off when overheated
•
3rd protection device: Thermostat cuts off main power.
Safety device
•
A fuser power is cut off when a front cover is opened
•
Maintain a temperature of fuser cover’s surface under 80
℃
for user, and attach a caution label at where customer
can see easily when customer open a rear cover.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
2-14