Samsung XA100F, Product User Manual

Page: 45 / 117

45
9.3 Main Menu
System
Reconnect This is used to reconnecting the NovaLCT-Mars to the LED display control
system.
Setting
Screen Config
Only accessible by advanced users. This is used for configuration of the LED display
control system. Details about this operation will be given in a later part of this manual.
Brightness
This is used for adjusting the LED display brightness. There are two ways for brightness
adjustment, automatic brightness and manual brightness. Details about brightness
adjustment will be given in a later part of this manual.
Multi-function Card
This is used to open the page for multifunction card configuration. Details will be given in a
later part of this manual.
Multiple Screen Management
Only accessible by advanced users. This is used to open the page for combination display
configuration. It makes the management of brightness control and monitoring of multiple
LED displays easier when these LED displays are combined together. Details will be
given in a later part of this manual.
Hardware Information
This is used to check the information about the current LED display control system.
Prestore Screen
Enter the restore screen, booting screen and no signal (including the disconnected
network cable and no DVI signal) screen settings can be conducted.
Advanced color configuration
Factory Setting (current gain, RGB brightness).
Configuration color space (original color space
，
target color space)
Colortemperature table.
My NovaiCare
Register the display screen to the user in NovaiCare.
Module Flash
View correction coefficients of the receiving card and module;
Save correction coefficients in the receiving card and module;
Test whether Flash is normal .
Receiving card relay
Set parameters for the receiving card relay;
Reset the time of the receiving card.
Configure information management(M) ---Import/Export config.
Set initial position
---Set the initial coordinates.