171
Q
How can I receive a FAX in Sleep mode (Standby
Mode)?
A
To receive a FAX when the computer is in Sleep
Mode (Standby Mode), the computer must be
configured as follows.
The FAX program must be configured so that it
receives FAXES automatically referring to the FAX
program manual.
Click
Start > Control Panel > Hardware and
Sound
.
Click on
Phone and Modem Options
.
In the
Modem
tab, select an installed modem
and click Properties.
In the Power Management tab of the Modem
Properties window, select the
Wake up the
computer with this device
option and click the
OK
button.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
When the modem is configured as above, and a FAX
arrives, the computer wakes up from Sleep Mode
and receives the FAX.
Q
The <Wake On LAN> function
A1
<Wake On LAN> is a function that activates the
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network (wired LAN).
Using the <Wake On LAN> Function
Click
Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections
.
Right-click on the Local Area Connection and
select Properties.
Click
Configure
> Power Management
tab. Select
Allow this device to bring the
computer out of standby
, then click
OK
.
Restart the system.
—
If the system is activated from Sleep mode when
there is no received signal, use the system after
disabling the <Wake On LAN> function.
—
When turning the power off when <Wake On
LAN> is disabled, the LAN LED may continue to
be lit.
—
Connecting a wired LAN while using a wireless
LAN may not activate the <Wake On LAN>
function. Set the Wireless LAN to
Disable
to use
the <Wake On LAN> function.
Wired Network (LAN) Related
Summary of Contents for X22
Page 1: ...User Guide X22 ...
