English
Troubleshooting
English
64
Code
Action
AddWash door is open
(applicable models only)
This message appears when you open the AddWash door without tapping and
holding . If this happens, do one of the following:
• Press the AddWash door to close properly. Then, tap and hold and try
again.
• To add laundry, open the AddWash door and input laundry. Close the
AddWash door properly. Then, tap and hold to resume operation.
OC
Water has overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local Samsung
service centre.
LC
,
LC1
Check the drain hose.
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service centre.
3C
Check the drum motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service centre.
3CP
The electronic control needs to be checked.
• Try restarting the cycle.
• If the information code remains, contact a customer service centre.
UC
Check the pulsator motor for operation.
• Check if power is supplied properly.
• If the information code remains, contact a customer service centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service centre.
HC
High temperature heating check.
• If the information code remains, contact a customer service centre.
1C
The Water Level sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service centre.
AC
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service centre.
8C
The MEMS sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service centre.
Untitled-6 64
2021-05-11 6:11:37
