manualshive.com logo in svg

Samsung WW8*J6 Series, User Manual

Share
Download
Samsung WW8*J6 Series User Manual Download Page 34

34  English

Oper

ations

Operations

Options

Option

Description

Intensive

• 

For badly soiled laundry. The operation time for each cycle is 
longer than normal.

Pre Wash

• 

This will add a preliminary washing cycle before the main 
wash cycle.

Bubble Soak

• 

Bubble Soak helps remove a variety of stubborn stains.

• 

With Bubble Soak selected, laundry is thoroughly soaked in 
water bubbles for effective washing.

• 

Bubble Soak is available with and adds up to 30 minutes to 
4 cycles: Cotton, Synthetics, Denim, and Baby Care.

Quick Wash 
15’/30’

• 

Specifically for up to 2 kg of lightly soiled garments

• 

The cycle time differs depending on the water supply 
conditions, the load and type of laundry, soiling levels, and 
extra options selected.

• 

The cycle time changes from Off > 15 min > 30 min, and back 
to Off in this sequence.

• 

A recommended amount of detergent is less than 20 g (for a 
2 kg load)

WW6000J(SEPM)-03580Q_EN (U.K).indd   34

2/9/2015   7:30:17 PM

Summary of Contents for WW8*J6 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands