manualshive.com logo in svg

Samsung WW8*J6 Series, User Manual

Share
Download
Samsung WW8*J6 Series User Manual Download Page 29

English  29

Oper

ations

Operations

Control panel

WW8*J6*****

01

02

03

04

05

06

07

08

09

11

10

WW9*J6*****

01

02

03

04

05

06

07

08

09

11

10

01 

Cycle Selector

Turn the dial to select a cycle.

02 

Display

The display shows current cycle information and estimated time 
remaining, or an information code when a problem occurs.

03 

Temp.

Press to change the water temperature for the current cycle.

04 

Rinse

Press to change the rinse count for the current cycle. You can set the 
rinse count to a max of 5.

05 

Spin

Press to change the spinning speed for the current cycle.

•  Rinse Hold 

: The final rinse process is suspended so that the 

laundry remains in the water. To unload the laundry, run a drain 
or spin process.

•  No Spin 

: The drum does not spin after the final drain process.

06 

Options

Press to select an option from Intensive, Prewash, and In 
Prewash. Press again to deselect.

WW6000J(SEPM)-03580Q_EN (U.K).indd   29

2/9/2015   7:30:16 PM

Summary of Contents for WW8*J6 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands