background image

6 _ Features and Specifications 

Features

Description

Baby Care

•  Featuring a high-temperature wash and extra rinses to help remove the remaining 

detergent effectively.

Silent Wash

•  For reducing operating noise and vibration.

Mixed Load
(applicable models only)

•  For mixed load consisting of cotton and synthetic.

Cloudy Day

•  For optimum spin drying at high humid condition.

Rinse+Spin

•  Featuring an additional rinse process after applying fabric softener to the laundry.

Drain/Spin

•  For draining the water inside the drum and running an additional spin process to 

effectively remove moisture from laundry.

Drum Clean+

(applicable models only)

•  Cleans the drum by removing dirt and bacteria from it.
•  Cleans the rubber door gasket by removing dirt from the gasket.

•  Perform once every 40 washes with no detergent or bleach applied. Notification message 

appears after every 40 washes.

•  Make sure the drum is empty.
•  Do not use any cleaning agents for cleaning the drum.

Drum Clean

(applicable models only)

•  Cleans the drum by removing dirt and bacteria from it.

•  Perform once every 40 washes with no detergent or bleach applied. Notification message 

appears after every 40 washes.

•  Make sure the drum is empty.
•  Do not use any cleaning agents for cleaning the drum.

Summary of Contents for WW70A6S28AE





















































Reviews: