Disassembly and Reassembly _ 31
Reassembly
Part
Figure
Description
Drain Pump
1. Assemble the pump in the right position as
shown in the picture, pull the drainage hose
towards you.
Be careful not to rip the drainage hose.
2. Assemble 2 screws holding the drain pump
using (+) screw driver.
3. Assemble the Band Ring (3ea) and the hose
(3ea) using long nose pliers.
4. Connect the terminals (2ea) each.
Make sure the Wire harness are not getting
stuck in other parts.
FRONT
BACK
5. Assemble the cover on the top and on the back.
6. Assemble the drainage hose.
