Samsung WS-28A116D Owner'S Instructions Manual Download Page 50

Page: 50 / 52

ENG

Troubleshooting:

Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,
distorted sound

Digital Text does not appear

Remote control malfunctions

◆

Check that the mains lead has been connected to a wall socket.

◆

Check that you have pressed the “

” (On/Off) button and the

POWER

(

) button.

◆

Check the picture contrast and brightness settings.

◆

Check the volume.

◆

Check the volume.

◆

Check whether the

MUTE

button on the remote control has been

pressed.

◆

Adjust the colour settings.

◆

Check that the broadcast system selected is correct.

◆

Try to identify the electrical appliance that is affecting the television,
then move it further away.

◆

Plug your television into a different mains socket.

◆

Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.

◆

Check if Digital Text is enabled in the

Preference

menu. (Change

Enable

if it is set to

Disable

)

◆

Replace the remote control batteries.

◆

Clean the upper edge of the remote control (transmission window).

◆

Check the battery terminals.

Automatic Degaussing to Remove Colour Patches

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.

If you move the television to a different position and color patches appear on the screen, you must:

◆

Switch the television off by pressing the “

” (On/Off) button on the front panel

◆

Unplug the television from the wall socket

◆

Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER” (

) button on the remote control.

☛

If your television will be left unattended, press the “

” (On/Off) button to turn your

television off.

Summary of Contents for WS-28A116D





















































Search results

Summary of Contents for WS-28A116D

Reviews:

Related manuals for WS-28A116D

Brands by name

Popular brands

Samsung WS-28A116D, Owner'S Instructions Manual

Search results

Summary of Contents for WS-28A116D

Reviews:

Related manuals for WS-28A116D

Brands by name

Popular brands