18_
Troubleshooting
troubleshooting
PROBLEMS AND SOLUTIONS
PROBLEM
SOLUTION
The washing machine
will not start
•
Make sure the door is firmly closed.
•
Make sure the washing machine is plugged in.
•
Make sure the water source faucet is turned on.
•
Make sure to press the Start/Pause button.
No water or insufficient
water supply
•
Make sure the water source faucet is turned on.
•
Make sure the water source hose is not frozen.
•
Make sure the water intake hose is not bent.
•
Make sure the filter on the water intake hose is not clogged.
Detergent remains in the
detergent drawer after
the wash program is
complete
•
Make sure the washing machine is running with sufficient water
pressure.
•
Put the detergents in the inner parts of the detergent drawer(away from
the outside edges).
Washing machine
vibrates or is too noisy
•
Make sure the washing machine is set on a level surface. If the surface is
not level, adjust the washing machine feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure the washing machine is not touching any other object.
•
Make sure the laundry load is balanced.
The washing machine
does not drain and/or
spin
•
Make sure the drain hose is not squashed or bent.
•
Make sure the water hose mesh filter is not clogged.
The Door does not open
•
Disconnect the power plug from the power supply.
•
Remove the water from the washing machine.
•
Open the filter cover using a coin.
•
Locate the orange plastic tab and pull forward to
open the door.
UNDERSTANDING ERROR MESSAGES
ERROR CODE
SOLUTION
door
•
Close the door.
4E
•
Make sure the source water faucet is turned on.
•
Check the water pressure.
5E
•
Clean the debris filter.
•
Make sure the drainage hose is installed correctly.
UE
•
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans,
the final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
cE/3E
•
Call after-sales service.
Before contacting After-Sales service:
1.
Try to remedy the problem (See “Troubleshooting” on this page).
2.
Restart the programme to see if the fault is repeated.
3.
If the malfunction persists, call after-sales service and describe the problem.
WF7522S8-02410E_EN.indd 18
2007-03-08 ｿﾀﾈﾄ 12:00:48
