Washing a load of laundry
_13
Pause Option (Stop & Adding laundry Function)
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.
Open the door.
2.
Remove laundry.
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1.
Turn the water supply on.
2.
Press the (On/Off) button on the washing machine.
3.
Open the door.
4.
Load the articles one at a time loosely into the drum, without overfilling.
5.
Close the door.
6.
Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7.
Press the
Temperature
button to select the temperature. (cold(0˚C), 30˚C, 40˚C, 60˚C, 95˚C)
8.
Press to
Rinse
button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9.
Press the
Spin
button to select the spin speed. [ 0, 400, 800, 1000 or 1200 revolutions per
minute(rpm)]
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine.
0 : No spin , Non display : Rinse hold
10.
Press the button repeatedly to cycle through the available delayed start options (from 3 hour
to 24 hours in one hour increments). Displayed hours means the time of finished washing-
cycle.
11.
Press the
Start/Pause
button and the machine will begin the cycle.
02 W
ashing a load of laundry
WF7522S8-02410E_EN.indd 13
2007-03-08 ｿﾀﾈﾄ 12:00:46
