Troubleshooting
English
57
Information codes
If the washer fails to operate, you may see an information code on the screen. Check the
table below and try the suggestions.
Code
Action
1C
Check the water level sensor.
• Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
• Depending on the model, the drain system drains water
automatically. The
POWER
and
START/PAUSE
buttons may be
disabled during this process.
DC
The door is open.
• Close the door and press
START/PAUSE
to resume operation.
DC1
Check the door switch.
• Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
LC
Check for water leaks.
• Power the washer off, and then check the drain system for any
leaks. Once the leak issue is resolved, power the washer on.
• Depending on the model, the drain system drains water
automatically. The
POWER
and
START/PAUSE
buttons may be
disabled during this process.
4C
Check the water supply line.
• Check the connection to the water lines (including water taps).
• Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
• Depending on the model, the drain system drains water
automatically. The
POWER
and
START/PAUSE
buttons may be
disabled during this process.
4C2
Laundry needs protection because the water being supplied is too hot.
• Make sure the cold and hot water taps are properly connected.
• Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
5C
Check the drain system.
• Make sure the drain filter is not clogged.
• If the drain filter is clogged, clean the filter, and then restart the
washer.
WF6300N_DC68-03665J-00_EN.indd 57
2017-12-06 5:17:08
Summary of Contents for WF45N6300A Series
Page 1: ...Washer User manual WF45N6300A WF6300N_DC68 03665J 00_EN indd 1 2017 12 06 5 16 46...
Page 55: ...Memo WF6300N_DC68 03665J 00_EN indd 69 2017 12 06 5 17 21...
Page 56: ...Memo WF6300N_DC68 03665J 00_EN indd 70 2017 12 06 5 17 21...
Page 57: ...Memo WF6300N_DC68 03665J 00_EN indd 71 2017 12 06 5 17 21...
