Samsung WF45N6300A Series, User Manual

Page: 24 / 58

Operations
Operations
English 38
Options
Option Description
Pre Wash
• This will add a preliminary washing process before the main
wash cycle.
a. Add detergent to the pre-wash section of the detergent
compartment.
b. Turn the Pre Wash option on. The washer fills with cold
water and detergent, tumbles, then drains and advances to
the selected wash cycle.
NOTE
This option is not available with some cycles.
Extra Rinse
• Adds an additional rinse at the end of the cycle to remove
laundry additives more thoroughly.
Extra Spin
• Adds additional spin time to remove more water from loads.
Steam
• Press this button to use the Steam function. Steam is available
with the NORMAL, HEAVY DUTY, BEDDING, SANITIZE, DEEP
STEAM and ALLERGEN. For heavily soiled, colorfast items, the
Steam function improves stain treatment and uses less water.
My Cycle
• Create your own washing cycle with preferred settings and use
the cycle with a single button push.
Delay End
• Set the washer to finish your wash automatically at a later time.
Choose a delay of between 1 to 24 hours (in 1 hour increments).
Self Clean+
• Cleans the drum by removing dirt and bacteria from the drum.
• Perform once every 40 washes with no detergent or bleach
added.
• Make sure the drum is empty.
• Do not add any drum cleaning agents.
Super Speed
• Press this button if you need to shorten the washing time,
applicable for NORMAL, DEEP STEAM, HEAVY DUTY, BEDDING
or ALLERGEN. The shortened time may differ depending on the
selected cycle/load/options.
Smart Control
• After connecting the lower washer to your home network using
the Samsung Smart Home app, you can control the washer
remotely. When started, the Smart Control indicator blinks and
the front door locks. The washer enters waiting mode and waits
for remote commands. For more information, visit the Samsung
Smart Home app page.
WF6300N_DC68-03665J-00_EN.indd 38 2017-12-06 5:17:00