Maintenance
English
45
Maintenance
Keep the washer clean to prevent its performance from deteriorating and to preserve it
throughout its life cycle.
WARNING
Control board, heat sink, motor, inlet valve and pump are intentionally not grounded and
may present a risk of electric shock only during servicing.
Self Clean+
Perform this cycle regularly to clean the drum and to remove bacteria from it.
1.
Make sure the drum is empty.
2.
Press
POWER
to turn on the washer.
3.
Press
Self Clean+
.
4.
Press
START/PAUSE
.
NOTE
The water temperature for
Self Clean+
is set to HOT, which cannot be changed.
CAUTION
Do not use any cleaning agents. Do not add detergent or bleach. Chemical residue in the
drum degrades the cleaning performance.
Self Clean+ reminder (
)
• The
Self Clean+
reminder appears on the main screen once every 40 washes. It is
advisable to perform the
Self Clean+
regularly.
• If you do not run the cycle within 1 hour when the
Self Clean+
reminder appears, the
reminder turns off automatically.
• When you first see this reminder, you can ignore the reminder for 6 consecutive
washes. From the 7
th
wash, the reminder no longer appears. However, it appears again
on the second 40
th
wash.
WF6300N_DC68-03665J-00_EN.indd 45
2017-12-06 5:17:03
Summary of Contents for WF45N6300A Series
Page 1: ...Washer User manual WF45N6300A WF6300N_DC68 03665J 00_EN indd 1 2017 12 06 5 16 46...
Page 55: ...Memo WF6300N_DC68 03665J 00_EN indd 69 2017 12 06 5 17 21...
Page 56: ...Memo WF6300N_DC68 03665J 00_EN indd 70 2017 12 06 5 17 21...
Page 57: ...Memo WF6300N_DC68 03665J 00_EN indd 71 2017 12 06 5 17 21...
