36_
troubleshooting
troubleshooting
CHECK THESE POINTS IF YOUR WASHER…
PROBLEM
SOLUTION
Will not start..
•
Make sure the door is firmly closed.
•
Make sure your Washer is plugged in.
•
Make sure the water source faucets are open.
•
Make sure to press the Start/Pause Button to start your Washer.
•
Make sure Child Lock is not activated; see page 25.
•
Before your Washer starts to fill, it will make a series of clicking noises to
check the door lock and do a quick drain.
•
Check the fuse or reset the circuit breaker
Has no water or not enough
water..
•
Turn both faucets on fully.
•
Make sure the door is tightly closed.
•
Straighten the water inlet hoses.
•
Disconnect hoses and clean screens. Hose filter screens may be
clogged.
•
Open and close the door, then press the Start/Pause Button.
Has detergent remaining
in the automatic dispenser
after the wash cycle is
complete.
•
Make sure your Washer is running with sufficient water pressure.
•
Make sure the Detergent Selector dial is in the upper position when using
granular detergent.
Vibrates or is too noisy.
•
Make sure your Washer is set on a level surface. If the surface is not level,
adjust your Washer feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure your Washer is not touching any other object.
•
Make sure the laundry load is balanced.
Stops
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door and press the Start/Pause Button to start your Washer.
For your safety, your Washer will not tumble or spin unless the door is
closed.
•
Before your Washer starts to fill, it will make a series of clicking noises to
check the door lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly and it may
start.
•
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
WF433BGJ-03159C-02_EN_20120829.indd Sec7:36
WF433BGJ-03159C-02_EN_20120829.indd Sec7:36
2012-08-31
12:35:33
2012-08-31
12:35:33
