32_
maintaining your washer
PURE CYCLE™
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1.
Press the
Power
button.
2.
Press the
Pure Cycle™
button.
• Once the Pure Cycle button is pressed, the only
function that can be set is Delay Start.
3.
Press the
Start/Pause
button.
• When you press the Start/Pause button, Pure Cycle
begins.
•
Using Pure Cycle, you can clean the drum without using a cleansing agent.
•
Never use Pure Cycle when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
• If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer.
(When using a
powder-type cleansing agent , remove the liquid detergent compartment.)
The Pure Cycle Auto Indicator Function
• If the “
Pure Cycle
” button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “
Pure Cycle
” indicator
turns off . However, the “
Pure Cycle
” indicator will light
again after two washes. Not running Pure Cycle at this
point will not cause a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may diff er depending on the
number of times the washing machine is used.
maintaining your washer
CAUTION
WF395BTPA-03145B-02_EN_20120829.indd 32
WF395BTPA-03145B-02_EN_20120829.indd 32
2012-08-31
12:36:24
2012-08-31
12:36:24
