ALIGNMENT AND ADJUSTMENTS
11
Board Input Test Mode
Definition of Board Input Test Mode:
- Board Input Test Mode is to displays a specified input after a key press.
How to Enter:
- To enter the Board Input Test Mode, press the Spin Key during Service Mode.
Board Input Test Mode:
1.
Activate the Service Mode first.
2.
Press the Spin Key to start Board Input Test.
3.
Turn the Jog-Dial so that the Pre Wash LED is turned on, and press the Start/Pause key. The Water
Temperature will be displayed in Celsius.
4.
Turn the Jog-Dial so that the Extra Rinse(or Steam) LED is turned on, and press the Start/Pause
key. The Water Temperature will be displayed in Fahrenheit.
5.
Turn the Jog-Dial so that the Cold/Cold LED is turned on, and press the Start/Pause key. The door
status will be displayed (OP if open, CL if closed).
6.
Turn the Jog-Dial so that the No Spin LED is turned on, and press the Start/Pause key. The Door
Lock Switch status will be displayed (UL if unlocked, LO if locked).
7.
Turn the Jog-Dial so that the Soil Level Light LED is turned on, and press the Start/Pause key. The
Water Frequency will be displayed.
8.
Turn the Jog Dial so that the Signal Off LED is turned on and press the Start/Pause button.
Within 3 seconds of pressing the button, the status of the Silver Nano kit is displayed.
1. Delayed:
0000
2. Normal:
---
3. Abnormal:
ㅂ
E
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
Techsheet-WF350AN-02834A-03_EN.indd 11
2011-09-28 �� 4:00:31
Summary of Contents for WF331ANW/XAA
Page 23: ...MEMO Techsheet WF350AN 02834A 03_EN indd 23 2011 09 28 4 00 33 ...
Page 24: ...Techsheet WF350AN 02834A 03_EN indd 24 2011 09 28 4 00 33 ...
Page 47: ...MÉMO Techsheet WF350AN 02834A 03_CFR indd 23 2011 09 28 3 52 30 ...
Page 48: ...Techsheet WF350AN 02834A 03_CFR indd 24 2011 09 28 3 52 30 ...
