Samsung WF-R1061 Service Manual Download Page 5

Page: 5 / 70

1-2. Precautions upon Installation

■ How to Remove Shipping Bolts

1. Remove the screws by using
the supplied spanner.

2. Remove the shipping bolts
from the back of the unit.

3. Fill the holes with the
supplied plastic caps.

4. Keep the shipping bolts and
screws for future use.

■ Precautions before Installation

The unit is quite heavy. So,
make sure to have 2 or more
personnel move it.

Install the unit at a place with
a wall outlet easily accessible.

Make sure that the unit stands
on a ﬁ rm and leveled ﬂ oor.

keep it away from direct sunlight
or high humidity, and install it in
a place with good ventilation.

Keep the unit away from places in
which it is freezing, especially in
winter.

Keep the unit away from heat
appliances such as a heater.

All manuals and user guides at all-guides.com

Summary of Contents for WF-R1061







































































Search results

Summary of Contents for WF-R1061

Reviews:

Related manuals for WF-R1061

Brands by name

Popular brands

Samsung WF-R1061, Service Manual

Search results

Summary of Contents for WF-R1061

Reviews:

Related manuals for WF-R1061

Brands by name

Popular brands