8
Webthru SWC 306 User’s Guide
4. Description on LED of Ethernet Port
Yellow LED
: This LED indicates the status of data transmission. After power is supplied, it is on for the first
4-5 seconds and then it goes off. And it blinks continuously when a user access Webthru and Webthru
transmits data.
Green LED
: This LED indicates the status of networking. After power is supplied, it is on for the first 1-2
seconds, and then it blinks once at every one second as long as the network is connected.
5. Descriptions on DIP Switches
To configure the function of the six coaxial cable ports at the rear of Webthru SWC 306.
You can configure the relevant channels with each switch. If you connect two CCTV cameras(1Vp-p
/75ohm) to Video Inputs and monitor real time video through 1 and 2 channels, place the two DIP switches
(marked with No. 1 and 2) at 75ohm position.
1
2
3
4
5
O N
O F F
7 5
Ω
D I P S w i t c h
6
Hi-Z
75ohm