11
Please clean the filter net often: Pull out the filter net in the inlet water valve and clean the dirt on it with a brush.
Insert it into the valve after being washed with water.
NOTICE:
The dirt on the filter net will produce some problems, like water not
supplied or only little flow of water supplied. After clean it, please be
sure to insert the filter net into the valve.
CONNECTING THE DRAIN HOSE
The drain hose is normally connected on the
side of the machine. Consumers can refit it on the bit if necessary.
left
NOTICE:
Before refit, the power supply must be cut of (For the danger of getting an electric shock)
1.
Spread soft cloth such as a blanket as a pad on
the floor, lay down the washing machine on the
back, then take off the cover at the drain hose
adaptor (right).
Do not lay the washing machine directly on the floor,
because the floor or the machine may get damaged.
2.
Take off the drain hose from the fixing clip in the
left.
You should take it off in the order of drain hose
adaptor (left)
, fixing clip
and fixing clip
.
Note: Do not damage or break the drain hose during
operation.
3.
Install the drain hose from the fixing clip in the
right.
You should install it in the order of fixing clip and
drain hose adaptor (right)
.
Note: Fix the "smooth part" of the drain hose to the
" fixing clip
" during operation.
NOTICE:
Be careful not to damage the drain hose during changing its position. If the drain hose is damage,
it will occur leaking.
CLEANING THE FILTER NET
4.
Align the cover to the "drain hose adaptor (left)"
and install it, then lift up the machine tenderly.
2
3
Front
Drain hose
adaptor (left)
Drain hose
adaptor (right)
Blanket
Cover
Back
Drain hose
adaptor (left)
Fixing clip
Fixing clip
Fixing clip
Smooth part
Drain hose
adaptor (right)
Cover
Front
Drain hose
adaptor (left)
Drain hose
adaptor (right)
Blanket
Back
