Samsung WA52M7750A Sereis, User Manual

Page: 23 / 236

English 23
Ins
tallation
4. Connect the ends of the water supply
hoses to the water supply intake
connections at the back of the washer.
CAUTION
The water supply hose connected to the hot
faucet must be connected to the hot water
supply intake and the water hose connected
to the cold faucet must be connected to the
cold water supply intake.
5. Tighten the fittings by hand until they
are snug, and then tighten them an
additional two-thirds of a turn with a
plier.
NOTE
To ensure the correct water usage, connect
both the hot and cold water faucets. If either
or both are not connected, an “4C” (no fill)
code can be displayed.
NOTE
If you do not want to use the hot water
supply hose, insert the water intake cap
into the hot water supply intake hole. In
this case, you must select the
Tap Cold
for the water temperature. If you select
the
Tap Cold , all the lamps for the water
temperature options are turned off.
CAUTION
Confirm that the water supply hoses are not
twisted or bent. If the hoses are twisted or
bent, the hoses can leak and cause electric
shock due to the water leakage.
6.
Turn on the hot and cold water supplies
and check all the water supply intake
connections and the faucets for water
leaks.
WA7700M_DC68-03774D-04_EN.indd 23 2019-02-14 6:24:07