36 English
Tr
ouble
shoo
ting
Troubleshooting
Flashing Indicator
Symptom
Solution
High
The machine tries to fill the tub
with water but fails to reach
the set level. If this happens,
the machine drains water for
3 minutes. During this process,
the Power button is disabled.
Call for service.
Medium
The water level sensor is
detected that it has an error.
Call for service.
Low
The machine fails to drain. This
may happen because the drain
hose or system is clogged.
Do the following:
1.
Turn the machine off and
turn it on again.
2.
Select Spin with no options.
3.
Press
START/PAUSE
to start
the cycle. The machine
starts to drain water.
NOTE
If failure to drain continues, call
for service.
Hot & Warm
The machine failed to drain
water due to an unbalanced
load.
Redistribute items evenly in
the tub, and then press
START/
PAUSE
to restart the cycle.
Hot & Eco Warm
The motor is not running
properly.
Restart the cycle. If these
indicators continue to flash, call
for service.
Hot & Cool
The MEMS sensor is not
operating properly.
Call for service.
Hot & Extra High
The door lock is not operating
properly.
Close the door properly, and
the restart the cycle. If these
indicators continue to flash, call
for service.
Hot & High
The door lock is not operating
properly.
Close the door properly, and
the restart the cycle. If these
indicators continue to flash, call
for service.
WA3100M_DC68-03823G-00_EN.indd 36
2017-11-17 4:35:39