ENGLISH
Advanced Recording
52
●
DATE/TIME
✤
The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
✤
The date and time are automatically recorded on a special data area of the tape.
✤
You can choose to display - the OFF, DATE, TIME, DATE/TIME
■
OFF only
■
DATE only
■
TIME only
■
DATE & TIME
1. Press the MENU button.
■
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Push the MENU DIAL to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
■
To return to the previous menu, place the cur- sor on the return icon
located at the lower part of the menu and Push the MENU DIAL.
6. To exit, press the MENU button.
Reference
■
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■
The DATE/TIME will read “- - -” in the following conditions.
-
During playback of a blank section of a tape.
-
If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-
When the battery becomes weak or dead.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME
