Samsung UN19D4000ND User Manual Download Page 71

Page: 71 / 228

◀

▶

English

●

Auto Volume (Off / Normal / Night)
Normal

equalizes the volume level on each channel, so that when you change

channels, the volume level is the same.

Night

equalizes and decrease the volume level on each channel, so each

channel is quieter.

Night

is useful at night, when you may want to keep the

volume low.

If connecting to an external device using the HDMI/DVI cable, it is
recommended to turn off

Auto Volume

. Control as this option may

compromise the volume setting controlled by the external device.

■

Reset Sound (OK / Cancel)

Reset all sound settings to the factory defaults. Select

, press

ENTER

select

on the pop-up, and then press

ENTER

again.

Summary of Contents for UN19D4000ND





































































































































































































































Search results

Summary of Contents for UN19D4000ND

Reviews:

Related manuals for UN19D4000ND

Brands by name

Popular brands

Samsung UN19D4000ND, User Manual

Search results

Summary of Contents for UN19D4000ND

Reviews:

Related manuals for UN19D4000ND

Brands by name

Popular brands