Samsung UN19D4000ND User Manual Download Page 189

Page: 189 / 228

◀

▶

English

Problem

Possible Solution

The connected
device is not
displayed.

●

Check whether or not the device supports functions.

●

Check whether or not the HDMI cable is properly connected.

●

Check whether

(HDMI-CEC)

is set to

in the

System

menu.

●

Search devices again.

●

You can connect an device using an HDMI cable only.
Some HDMI cables may not support functions.

●

If is terminated because there has been a power failure
or the HDMI cable has been disconnected, please repeat the
device scan.

The TV sound
is not output
through the
receiver.

●

Connect the optical cable between TV and the receiver.

Summary of Contents for UN19D4000ND





































































































































































































































Search results

Summary of Contents for UN19D4000ND

Reviews:

Related manuals for UN19D4000ND

Brands by name

Popular brands

Samsung UN19D4000ND, User Manual

Search results

Summary of Contents for UN19D4000ND

Reviews:

Related manuals for UN19D4000ND

Brands by name

Popular brands