Samsung UF-80DX Software User'S Manual Download Page 55

Page: 55 / 57

Troubleshooting(Macintosh Program)

If the UF-80 Viewer
does not run

The device operates in
USB 1.1 mode even
when it is connected to
a USB 2.0 compatible
system.

The device is connected
to a USB 2.0 compatible
port but the screen
display is slow.

To run the UF-80 Viewer, the digital visual presenter
must be connected to a Macintosh. The digital visual
presenter power must also be turned on.

Check the USB connection and the digital visual
presenter power.

To operate in USB 2.0 mode, the device must be
connected to a USB 2.0 compatible port or hub.

Connecting the device to a USB 1.1 hub connected
to a USB 2.0 compatible port or a keyboard/monitor
USB port makes it operate in 1.1 mode.

Close any other applications that are running at the
same time.

The screen display may be slow for some systems
with a low-specification graphics board.

Symptom

Solution

Summary of Contents for UF-80DX


























































Search results

Summary of Contents for UF-80DX

Reviews:

Related manuals for UF-80DX

Brands by name

Popular brands

Samsung UF-80DX, Software User'S Manual

Search results

Summary of Contents for UF-80DX

Reviews:

Related manuals for UF-80DX

Brands by name

Popular brands