Samsung UE46A User Manual Download Page 116

Page: 116 / 215

113

Screen Adjustment

4 Screen Adjustment

4.6.9

10p White Balance (Off / On)

Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

Interval

: Select interval to adjust.

Red

: Adjust the red level.

Green

: Adjust the green level.

Blue

: Adjust the blue level.

Reset

: Resets the

10p White Balance

to its default settings.

Available when the

Picture Mode

is set to

Movie

and when the external input is set to all input.

Some external devices may not support this function.

4.6.10

Flesh Tone

Emphasize pink “Flesh Tone.”

4.6.11

Edge Enhancement (Off / On)

Emphasize object boundaries.

4.6.12

Motion Lighting (Off / On)

Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.

4.6.13

LED Motion Plus (Off / On)

Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer

picture.

Summary of Contents for UE46A
























































































































































































































Search results

Summary of Contents for UE46A

Reviews:

Related manuals for UE46A

Brands by name

Popular brands

Samsung UE46A, User Manual

Search results

Summary of Contents for UE46A

Reviews:

Related manuals for UE46A

Brands by name

Popular brands