Samsung UE B7000WW Series, Service Manual

Page: 279 / 319

4-1
4. Troubleshooting
4. Troubleshooting
4-1. Troubleshooting
Check the various cable connections first.
• Check to see if there is a burnt or damaged cable.
• Check to see if there is a disconnected or loose cable connection.
• Check to see if the cables are connected according to the connection diagram.
Check the power input to the Main Board.
Check the internal patterns from both the FRC and FBE3 options.
FRC: Factory mode(mute 1 - 8- 2 power on when TV is “standby on “) -> Control -> Test Pattern -> FRC PATT_
BeforeDDR / AfterDDR
* FRCM pattern is created by FRCM IC(T-con)
FBE3: Factory mode(mute 1 - 8- 2 power on when TV is “standby on “) -> Control -> Test Pattern ->FBE Pattern Sel
* Main pattern is created by Main IC(Chelsea)
Case1: FBE3 ok,FRC NG: change the T-con Board
Case2: FBE3 NG, FRC NG: change the main Board
T-CON
SMPS Board
Main Board
< 46inch model >
* FRCQ : Micronas FRC chip
1.
2.
3.