25
English
04
Settings
6.
Select the desired network, and then press
the (
OK
) button.
|NOTE |
\
Alternatively, select
Add Network
at the
bottom of the wireless network list to establish
a connection. This method can be used when
you know the SSID (name) of the wireless
router.
7.
On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter letters by selecting a letter with an arrow
button, and then pressing (
OK
) button.
|NOTE |
\
To view the password as you enter it, use the
arrow buttons to select
Show Password
on
the right side, and then press (
OK
) button.
8.
When finished, select
Done
and then press
the (
OK
) button. The product verifies the
network connection and then connects to the
network.
9.
When verification is complete, select
OK
, and
then press the (
OK
) button.
|NOTE |
\
You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
1.
Follow the directions in Wireless - Automatic
through Step 6.
2.
The product searches for a network, and then
displays the connection failed message.
3.
On the bottom of the screen, select
IP
Settings
, and then press the (
OK
) button.
The
IP Settings
screen appears.
4.
Select the
IP Settings
field, and then press
the (
OK
) button.
5.
Select
Enter manually
in the
IP Settings
field, and then press the (
OK
) button.
6.
Select a parameter to enter (
IP Address
, for
example), and then press the (
OK
) button.
Use the
Left/Right
buttons on the remote
control to enter the numbers for the
parameter.
Use the
Left/Right/
(
OK
) buttons on the
remote control to move from entry field to
entry field within a parameter. When done with
one parameter, select the
Done
.
7.
Press the
Up
or
Down
button to move
to another parameter, and then enter the
numbers for that parameter following the
instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have filled in
all parameters.
|NOTE |
\
You can get the Network parameters from your
Internet provider.
9.
When finished, select
OK
, and then press the
(
OK
) button. The Security Screen appears.
10.
On the Security screen, enter your network's
Security Code or Pass Phrase. Enter letters
by selecting a letter with the
Up/Down/Left/
Right
buttons, and then press the (
OK
)
button.
11.
When finished, select
Done
at the right of the
screen, and then press the (
OK
) button.
The product verifies the network connection
and then connects to the network.
12.
After the product verifies the network, select
OK
, and then press the (
OK
) button.
