English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
Selecting a language Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
(Not available in some locations)
2
Wired/Wireless
Network Connection
Set up your network connection. Press the
ENTER
E
button
to start. If you want to setting to it later, select
Skip
. For more
information, refer to “Wired/Wireless Network Connection” in the
e-Manual.
3
Software upgrade
When network connection settings are complete, Software
Upgrade is available. Select
Next
to upgrade TV software. Your
TV will automatically upgrade, if your TV need a software upgrade.
If you want to upgrade later, select the
Skip
. For more information,
refer to “Software Upgrade” (Preference Features
→
Support
Menu) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting
Store
Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
MENU
for 5 sec.
Store Demo
is only for shop display. If you select it, several functions are not able
to use. Please select
Home Use
when you watch at home.
5
Selecting an country Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate country.
6
Selecting an area
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate area. (Not available in some locations)
7
Setting the
Clock
Mode
Set the
Clock Mode
automatically or manually.
Auto
: Allows you to select a time zone.
✎
Press the
▲
or
▼
button to highlight the time zone for your local area. Press
the
ENTER
E
button. (Australia only).
Manual
: Allows you to manually set the current date and time.
8
Selecting a channel
Select the channel source to memorise among
Digital & Analogue
/
Digital
/
Analogue
. When done, select
Next
. Scans for a channel automatically and stores
in the TV.
9
Enjoy your TV.
If you want to watch a broadcast programme, select
Close
. If you want to enjoy
the
Smart Hub
, select the Smart Hub. The
Smart Hub
will start. For more
detailed information, refer to “
Smart Hub
” in the e-Manual.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
P
POWER
[UD6400-XY]BN68-03480A-00Eng.indb 7
2011-04-04 오후 4:03:43
