Applications 98
7.
Touch
Alarm sound
.
8.
Touch the
Alarm type
drop-down menu and select one of the following alarm types:
• Melody
: the phone rings using the ring melody selected in the Ring tone menu.
• Increasing melody
: the melody volume increases.
• Vibration
: the phone vibrates but does not ring.
• Vibration then melody
: the phone vibrates 3 times and then starts ringing.
• Vibration & melody
: the phone vibrates and plays a melody.
• Vibration & increasing melody
: the phone vibrates and the melody volume increases simultaneously.
9.
Touch the
Alarm tone
field, then touch
Music
,
Sounds
or
Voice list
to choose the alarm
sound and touch
Select
.
10.
Touch and slide the Alarm volume bar to adjust the volume level for this alarm type (range is 1-7).
11.
Touch
Save
.
12.
Touch
Save
again to confirm your selections.
Tip:
To stop the alarm when it rings, touch any key or touch and slide the
Snooze
soft key to
snooze
or
stop
.
Voice Recognition
Nuance is an advanced speech recognition software used to activate a wide variety of functions on your phone.
Nuance software automatically voice activates (up to 2,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name naturally to dial, and use your voice to look up contacts,
launch applications and navigate phone menus.
1.
In Idle mode, touch
Menu
➔
Applications
➔
Voice recognition
.
2.
At the voice prompt, say a command. The list of available commands is listed below.
Note:
This list of voice commands is briefly displayed.