Samsung SyncMaster EX2220 Service Manual Download Page 4

Page: 4 / 43

3-1

3. Disassembly and Assembly

3. Disassembly and Assembly

This section describes the disassembly and reassembly sequences for this monitor.

Warning:

As this monitor has parts that are sensitive to static electricity, be careful when handling them.

3-1. Disassembly

Caution:

1. Turn the monitor off before beginning the disassembly process.

2. When disassembling the monitor, do not use any metal tools except for the provided jig.

3. Disassemble the monitor carefully as directed in the following procedures.

Description

Photo

Screws

1. Remove the stand body.

①

Turn the monitor over and insert your hands

into the top of the monitor at the center and

separate the front cover in the direction of the

arrow as shown in the figure.

②

Separate the sides of the front cover up to the

directed line as shown in the figure.

Summary of Contents for SyncMaster EX2220












































Search results

Summary of Contents for SyncMaster EX2220

Reviews:

Related manuals for SyncMaster EX2220

Brands by name

Popular brands

Samsung SyncMaster EX2220, Service Manual

Search results

Summary of Contents for SyncMaster EX2220

Reviews:

Related manuals for SyncMaster EX2220

Brands by name

Popular brands