Samsung SyncMaster 931CW PLUS User Manual Download Page 9

Page: 9 / 62

Introduction

Features

RTA Monitor

RTA (Response Time Accelerator)

•

A function that accelerates the response speed of the panel so as to provide a sharper and more
natural video display.

RTA On Activates the RTA function so that the panel operates at a higher response speed

than its original speed.

RTA

OFF

Deactivates the RTA function so that the panel operates at its original response
speed.

Note

If you turn the power off and on again after switching RTA off, the RTA function is automatically
switched On (Factory Setting)

Package Contents

Note

Please make sure the following items are included with your monitor.

If any items are missing, contact your dealer.

Contact a local dealer to buy optional items.

Unpacking

Type 1

Monitor

Type2

Summary of Contents for SyncMaster 931CW PLUS































































Search results

Summary of Contents for SyncMaster 931CW PLUS

Reviews:

Related manuals for SyncMaster 931CW PLUS

Brands by name

Popular brands

Samsung SyncMaster 931CW PLUS, User Manual

Search results

Summary of Contents for SyncMaster 931CW PLUS

Reviews:

Related manuals for SyncMaster 931CW PLUS

Brands by name

Popular brands