Samsung SyncMaster 931CW PLUS User Manual Download Page 51

Page: 51 / 62

How can I set the Power Saving function?

Windows XP:

Set the resolution in the Control Panel

→

Appearance and Themes

→

Display

→

Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).

Windows ME/2000:

Set the resolution at the Control Panel

→

Display

→

Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).

How can I clean the outer case/LCD Panel?

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning
solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.

Note

Before calling for assistance, check the information in this section to see if you can remedy any prob-
lems yourself. If you do need assistance, please call the phone number on the Information section or
contact your dealer.

Troubleshooting

Summary of Contents for SyncMaster 931CW PLUS































































Search results

Summary of Contents for SyncMaster 931CW PLUS

Reviews:

Related manuals for SyncMaster 931CW PLUS

Brands by name

Popular brands

Samsung SyncMaster 931CW PLUS, User Manual

Search results

Summary of Contents for SyncMaster 931CW PLUS

Reviews:

Related manuals for SyncMaster 931CW PLUS

Brands by name

Popular brands