Samsung SWL-2250U User Manual Download Page 3

Page: 3 / 100

This manual is provided for information purposes only. All information included herein
is subject to change without notice. Samsung Electronics is not responsible for any
damages, direct or indirect, arising from or related to use of this manual.

• ML-1750 and Samsung logo are trademarks of Samsung Electronics Co., Ltd.

• PCL and PCL 6 are trademarks of Helett-Packard Company.

• Centronics is a trademark of Centronics Data Computer Corporation.

• IBM and IBM PC are trademarks of International Business Machines Corporation.

• Apple, AppleTalk, TrueType, LaserWriter and Macintosh are trademarks of Apple

Computer, Inc.

• Microsoft, Windows, Windows 9x, Windows Me, Windows 2000, Windows NT and

Windows XP are registered trademarks of Micorsoft Corporation.

• All other brand or product names are trademarks of their respective companies or

organizations.

Summary of Contents for SWL-2250U





































































































Search results

Summary of Contents for SWL-2250U

Reviews:

Samsung SWL-2250U, User Manual, Page: 3 / 100

Search results

Summary of Contents for SWL-2250U

Reviews: