English - 5
English - 4
En
glis
h
2. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by
pressing the
(Power)
button on the main Soundbar unit.
BYE
•
The image of the Soundbar may differ from your Soundbar,
depending on the model.
3.
Configure “ID SET” using the Soundbar’s
remote control
Press the
Up
button on the Soundbar remote control for 5 seconds.
•
The
ID SET
message appears on the Soundbar main unit’s display
for a short time and then disappears.
•
After the
ID SET
process, the Soundbar power is automatically
turned on.
SOUN
D
MOD
E
PAIR
5 Sec
ID SET
•
The image of the Soundbar may differ from your Soundbar,
depending on the model.
4. Check if the LINK LED is solid blue
(connection complete)
Stops blinking.
Glows blue.
Rear of the Left
and Right Surround
Speakers
The LINK LED indicator
stops blinking and glows
a solid blue when a
connection is established
between the Soundbar and
the Surround Speakers.
5. If the SWA-9500S does not connect, take
the necessary steps according to the LED
Indicator’s status
LINK (Blue) On
: Successfully connected (normal operation).
LINK (Blue) Blinking
: Recovering the connection.
•
Check if the power cable attached to the main Soundbar unit
is connected properly or wait about 5 minutes.
•
Repeat steps 2 through 4.
STANDBY (Red) On
:
Standby (with the Soundbar main unit turned off).
•
Check if the power cable attached to the main Soundbar unit
is connected properly.
Connection failed.
•
1.
Press the
ID SET
button on the back of the Surround
Speakers with a pen tip for 5~6 seconds until the LINK LED
indicator blinks (in Blue).
5 Sec
2.
Repeat steps 2 through 4.
Red and blue Blinking
: Malfunction
•
See the contact information for the Samsung Service Centre
in this manual.
Installing the Surround Speakers on a
Wall (Optional)
You can purchase wall mounts separately to install the surround
speakers on a wall.
Wall mounts aren’t sold by Samsung.
Notes for Wall Mounting the Surround Speakers
•
Surround Speaker wall mounts must be able to support more
than 8.0 kg.
•
Hole size : 1/4 - 20 UNC threaded insert
Rear of the Left and Right Surround Speakers
– Standard Screw : 6.3 mm , 1.3 mm Pitch
– Length : 18.0 mm long
– Quantity : Left 1 EA / Right 1 EA
•
Check the strength of the wall before you install the Wall Mount
Brackets. If the strength is insufficient, make sure to reinforce
the wall before installing the Wall Mount Brackets and the
speakers on the wall.
•
Samsung is not liable for any damage to the product due to the
product being installed inappropriately.
•
Take care not to install the speakers sideways or upside down.
03 COMPATIBLE MODELS
•
Compatible with select Samsung Soundbar. Please visit the
Soundbar product page at
www.samsung.com/support
for more
information.
•
Compatible model list is subject to change without further notice.
04 OPEN SOURCE LICENCE
NOTICE
To send inquiries and requests for questions regarding open
sources, contact Samsung Open Source (http://opensource.
samsung.com)
Summary of Contents for SWA-9500S
Page 1: ...USER MANUAL SWA 9500S ...
