background image

Be sure that the washer is grounded.

To avoid electrical shock, use metal pipe for the 
ground connection.But do not ground the washer 
with gas pipes or telephone lines because of the 
dangers of explosion or lightning strike.

Ventilation openings must not be obstructed 
by carpeting when the washing machine 
is installed on a carpeted floor.

During spinning, don't put your hand 
in the spin basket.

Because the spin basket is rotating at high 
speed, rotating parts may injure your hand.

Never allow children to operate or play 
with the washer.

Disconnect the power cord from the power
supply when not in use.

2

FUZZY CONTROL
F

uzzy control operates with best washing course 

by sensing the washload like artificial intelligence.

CLEAN WASH BY THE DOUBLE FALL
D

ouble fall,falling down from top of the tub,cleans 

heavy dirt and dissolves detergent throughly 
with impact power.

①   

POWER BUTTON

Press this button once to operate.
Press once again to turn the washer off.

START/HOLD BUTTON

Use to pause and restart the operation.
To change the washing procedure during 
operation, press this button to stop, and 
once again to restart after changing the procedure. 

DELAY START BUTTON

Press this button when delay start 
washing is needed.

FUNCTION SELECT BUTTON

With every press of this button, the 
function changes;
WASH

RINSE

SPIN

WASH&RINSE

RINSE&SPIN

WASH&RINSE&SPIN

WASH

COURSE SELECT BUTTON

With every press of this button, the washing 
course changes;  FUZZY 

SOAK

WOOL 

SPEEDY

Put your laundry into the washer evenly.

Uneven laundry may cause noise or vibration.

Don't use excessively hot water. 
(50˚C or more)

Plastic parts may be deformed or damaged.
Also, clothing may be deformed or bleached.

Before washing, check all pockets.

If nails or pins remain in pockets,they  may  
damage the washer or clothes.

Never splash water on the control panel.

If the power supply cord of this
washer is damaged, it must be 
replaced by a repair shop appointed 
by the manufacturer, because special 
purpose tools are required.

DESCRIPTION OF PARTS

FEATURES

SAFETY INSTRUCTIONS

LID 

Be sure to keep the lid
closed during washing

and spinning.

Lint will be collected in the
lint filter during washing.

When the water pipe is metal,
make sure to cover the end 
of the ground wire.

Adjust the length of the 

legs when installing 

the washer.

LINT FILTER

POWER CORD

“MAGIC HAND”

PULSATOR

WATER DRAIN HOSE

DRAIN-HOSE
(PUMP)

DETERGENT BOX

RINSE CASE

SOUND ABSORPTION 
PANEL

GROUND LEAD

FRONT CONTROL 

PANEL

DOUBLE FALL GUIDE

BLEACH INLET

ADJUSTABLE LEGS 

WATER SUPPLY 
HOSE(HOT)

WATER SUPPLY HOSE
(COLD)

WATER LEVEL SELECT BUTTON

According to the washload,select the 
water level ; HIGH

MEDIUM

LOW

EXTRA LOW

HIGH

WATER SUPPLY SELECT BUTTON

As you press this button, the type of water 
is selected as follows. 
COLD

➝ 

COLDHHOT

➝ 

HOT

➝ 

COLD

REMAINING TIME INDICATOR LIGHT

The indicator light shows the remaining time
(in minutes) of each wash cycle.
At the end of the cycle,the power automatically 
switches off.

FUNCTION INDICATOR LIGHT

The function in use indicator shows the 
current function as a flashing symbol. 
The light goes out at the end of the function.

FUZZY

1

ADOPTION OF THE MAGIC HAND
T

he “Magic Hand” provides both the powerful washing 

action needed to completely clean larger and heavier 
items and the gentle washing action for dedicate fabric. 
The “Magic Hand” significantly increases washing 
power and ensures tangle-free operation.

Stainless

SPIN BASKET

CONTROL PANEL

Summary of Contents for SW70X1P

Page 1: ...rts may be deformed or damaged Also clothing may be deformed or bleached Before washing check all pockets If nails or pins remain in pockets they may damage the washer or clothes Never splash water on the control panel If the power supply cord of this washer is damaged it must be replaced by a repair shop appointed by the manufacturer because special purpose tools are required DESCRIPTION OF PARTS...

Page 2: ...matically Washing rinsing and spinning follow If you want to pause press the START HOLD button again You can change the course when paused FUNCTION FUNCTION BUTTON TIME MANUAL FUNCTIONS WASH ONLY Press the POWER button Press the FUNCTION SELECT button once Press the START HOLD button once Washing goes on for 23 minutes When the FUNCTION button is pressed during washing the wash time can be changed...

Page 3: ...llowing the arrow for gap about 5mm between them 3 Connect adaptor to the water tap by tightening the screws firmly Then turn part b following the arrow and put a and b together 5 Connect the other end of the water supply hose to the inlet water valve at the back of the washer Screw the hose clockwise all the way in If the water tap is a screw type assemble a water supply hose that fits to the tap...

Page 4: ...oduct occurs y y y y y y y y y y y SW70X1 P SW70X2 P SW75X1S P SW75X2S P FEATURES 1 DESCRIPTION OF PARTS 1 SAFETY INSTRUCTIONS 2 CONTROL PANEL 2 WASHING PROCEDURE 3 Fuzzy course 3 Soak course 3 Wool course 3 Speedy course 3 Delay start course 4 MANUAL FUNCTIONS 4 INSTALLATION 5 Environment 5 Assembling the sound absorbing panel 5 Connecting the drain hose 5 In case of pump drained washer 5 Cleanin...

Reviews: