Samsung SVR-960C Install Manual Download

Page: 46 / 87

Install Manual

Relay out connection

Connect relays to R1 ~ R16 as illustrated in the figure below. The example shows how to

connect a warning light. Refer to the section on handling wiring for more information about

connecting or disconnecting relay wires.

Relay Out Settings

Relays can be triggered by following events; alarm sensor, motion detection, video loss, hard

disk fail, hard disk full, fan fail, password fail, and DDNS registration failure. Relays can also

be triggered remotely over the network using the Samsung Network Video Management

software.

For more information, refer to the user manual.

The user manual can be downloaded from www.samsungcctv.com or on the CD

provided with the product.

3.3.3.3

D-I/O (Digital Input/Output) connection & settings

The D-I/O has 12 D-I/O ports and can accommodate 12 inputs/outputs. If sensors are working

Summary of Contents for SVR-960C
























































































Search results

Summary of Contents for SVR-960C

Reviews:

Related manuals for SVR-960C

Brands by name

Popular brands

Samsung SVR-960C, Install Manual

Search results

Summary of Contents for SVR-960C

Reviews:

Related manuals for SVR-960C

Brands by name

Popular brands