Samsung SVR-960C Install Manual Download

Page: 3 / 87

Install Manual

After the expiration of the warranty period (3 years), examination and repair will be provided for

a fee. Even during the warranty period, repair and examination of items outside the warranty

scope will require payment.

This product is not for exclusive use of crime prevention but for assistance in cases as

fire or theft. We take no responsibility for damage from any incident.

Experience and technical skills are needed for the installation of this product as an improper

installation may cause fire, electric shocks, or defects. Any installation job should be performed

by the vendor you purchased this product from.

This manual is authored SVR-3200, SVR-1680C, SVR-1660C, SVR-1645, SVR-960C, SVR-945,

SVR-480 according to firmware version

1.8.0

The content of this manual may differ according to Firmware or Software upgrades, and the

standard and appearance of the product is changeable without prior notice to users.

Summary of Contents for SVR-960C
























































































Search results

Summary of Contents for SVR-960C

Reviews:

Related manuals for SVR-960C

Brands by name

Popular brands

Samsung SVR-960C, Install Manual

Search results

Summary of Contents for SVR-960C

Reviews:

Related manuals for SVR-960C

Brands by name

Popular brands