Samsung SVR-1660 User Manual Download

Page: 78 / 89

User Manual

7.4.6 Microphone use

It can microphone On or Off and Default is Off. In case of click button, projecting button

changes to Blue and microphone is available.

Inactivated Mic button is the case that it does not support at relevant product.

7.4.7 Event Data

It shows Event data happens in real-time at bottom of monitoring page.

Indicated lists to Event data are as follows.

(Table. Event Icon)

Button

Function

Motion Detect On

Sensor Input

Relay Output On

No Video, Video Detected

Text Input

User Login

7.4.8 Image Recording & Image Storage

7.4.8.1

Image Recording

After selecting channel wants to recording from image monitoring, it selects “Rec Start”

pressing right mouse button. It can record image max. 10 minutes. It indicates recording time

on the image executing Quick Recording.

Summary of Contents for SVR-1660


























































































Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands

Samsung SVR-1660, User Manual

Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands