Samsung SVR-1660 User Manual Download

Page: 66 / 89

User Manual

Remote Controller ID

Max. 16 remote controllers ID are selectable, and it can control max. 16 DVR

It can register Remote controller as following order.

Direct Remote controller to DVR.

Press ID button that suits to Remote Control ID set.

If Remote controller ID is identical to DVR ID, DVR buzzers.

After tune ID, Remote controller is available to use.

DVR ID

This menu is to set relevant keyboard address when it operates all functions of DVR through

keyboard button. First set value is set to “1”. If it connects several DVR to 1 keyboard and use, it

can collide with other channel. At this time, it sets keyboard address to other value.

DVR Alias

This menu is to set DVR name.

Playback Deinterlace

It is On/Off Playback Deinterlace.

It works when Recording resolution sets to Full D1. When it sets to On, screen shaking is less in

Pause of Full D1 image.

Language

It supports multilingual for OSD menu. Select the language wants.

Firmware Update

Save update firmware in USB and connect it to DVR

Select firmware update item in the system menu and press ENTER

When there is question to update or not, peas Y and ENTER. The device reboot with buzzer

sound.

The firmware for USB update is formed in “*.dat” file.

Firmware update via network is perform update file and select the DVR to update and click on it.

When there is IP and MAC address, port for the selected DVR, type the password

“(default:11111111) at Admin’s Password” SNM-128S and press “Starting upgrade”

Rebooting message pops up after upgrade and press “Y”

Summary of Contents for SVR-1660


























































































Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands

Samsung SVR-1660, User Manual

Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands