Samsung SVR-1660 User Manual Download

Page: 52 / 89

User Manual

mode, or it can select the channel through [Enter] button or mouse wheel after window open

and the channel select using mouse wheel.

VGA Mode

It can select among 3 resolutions of VGA output, 800 x 600, 1024 x 768 and 1280 x 1024.

Info Level

Display information configures what kind of information will be shown to live image and

playback image.

In case of live image, user can set view configuration such as time, channel, event, recording

status, HDD, remote control ID, and text etc.

In case of playback image, configure time, commend, channel name, event, and text.

6.9 Event Setup

Event Setup includes 7 setups like Event, Text, D-I/O, Event Action, Preset, and System Event.

6.9.1 Event

Sensor

It can set 9 sensors. In case of All setup, all channels are set to N.O, N.C identically. And it can

select each channel and set to N.O, N.C, Off differently.

MD detects movement by each channel or all channels, and use to inform MD to user.

- Channel

Summary of Contents for SVR-1660


























































































Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands

Samsung SVR-1660, User Manual

Search results

Summary of Contents for SVR-1660

Reviews:

Related manuals for SVR-1660

Brands by name

Popular brands