4VQFSWJTPSTFUUJOH'VODUJPOT
11
Operation
C
h
a
p
te
r
2
1. Remove the
J1
Jumper on the SVD-4332’s bottom to enter supervisor mode.(refer to 25 page)
2. Press the
SET
button to select a desired supervisor setting item.
3. Press
+
/
-
button to select the value for selected setting item.
< SUPERVISOR MODE >
1. ID SET
MASTER
2. CAMERA QUANTITY
1
3. BELL SET
RELEASE
4. MULTI LOBBY SET
RELEASE
5. DOOR1 OPEN SET
MAIN
6. DOOR2 OPEN SET
MAIN
7. DOOR1 OPEN TIME SET
1SEC
8. DOOR2 OPEN TIME SET
1SEC
9. DOOR1 CALL TIME SET
1MIN
A. DOOR2 CALL TIME SET
1MIN
B. SLAVE CALL TIME SET
1MIN
C. DOOR1 TALK TIME SET
3MIN
D. DOOR2 TALK TIME SET
3MIN
E. SLAVE TALK TIME SET
3MIN
M. NAND BULK ADJUST
NO
N. VIDEO MODE SELECT
NTSC
O. SUPERVISOR DEFAULT
NO
Q. CHROMA DELAY
1SEC
R. STORAGE IMAGE NUM
128
-.---.-.-.-----.---.-.-.
---..-.---.-..---.------.--.-
---.----.---.-.-...---.-.
-.-.---.--.-.----.-----.
ⶺ
Entering for supervisor setting mode
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the
SET
button repeatedly to select
1.ID SET
.
2. Press the
+
/
-
buttons repeatedly to select the
Master
,
Slave 1
,
Slave 2
or
Slave 3
.
3. Press the
Interphone
button to store your setting, then exit.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
ⶺ
Setting the ID
Set to the Master or Slave mode, and select to Slave’s ID.
ⷅ
After connecting to the slave unit, be sure to set the SLAVE ID without overlap.
Do not overlap the SLAVE ID when multi-units are connected, it may cause malfunction of the master or the slave unit.
ⷅ
To save and exit your settings, press the
Interphone
button.
These functions are used to customize some product functions in the user’s environment.
10
These functions are used to customize some product functions in the user’s environment.
6TFS4FUUJOH'VODUJPOT
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the
SET
button repeatedly to select the
5.ALL IMAGE DELETE
.
2. Press the
+
/
-
buttons to select the
YES
or
NO
.
YES :
perform the deleting all images
NO :
cancel the deleting all images
3. To excute the selected condition, press the
Interphone
button.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
ⶺ
Deleting all stored images
ⷅ
To exit the user setting mode, select
F.EXIT
, and then press the
Interphone
button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the
SET
button repeatedly to select the
6. FACTORY DEFAULT
.
2. Press the
+
/
-
buttons to select the
YES
or
NO
.
Yes :
Perform the initialization
No :
Cancel the initialization
3. To excute the selected condition, press the
Interphone
button.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
ⶺ
System initialization
ⷅ
To exit the user setting mode, select
F.EXIT
, and then
press the
Interphone
button to save your settings.
In addition, if there is no input for more than 10
seconds, the mode is automatically ended.
ⷅ
Default setting values
- Door 1 melody : Ding-dong 1
- Door 2 melody : Ding-dong 2
- Slave melody : Ding-dong 3
- Voice volume/melody volume : 2 levels
- Color/Contrast/Brightness : 2 levels
Summary of Contents for SVD-4332
Page 1: ...Z6806140601A GC68 01539A ED 02 ...
Page 2: ......
