13
GB
Connecting the Audio Output Cable
Plug & Auto Set Up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
3
Start the auto scanning.
◆
The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
4
The current time and date are displayed automatically.
Check the date and time.
if it is :
◆
Incorrect, see page 17.
➢
Now, you only have to switch the DVD-VCR on and it
is ready for use.
☛
Function for “Plug & Auto Set Up” is fixed already.
So if you want to change this fixed one, you can change
it by Presetting the Stations Automatically in OSD “
Auto Setup” menu. (see page 19)
You can connect your DVD-VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi
stereo system when watching a programme or
recording via your DVD-VCR.
☛
◆
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the DVD-VCR is switched off.
◆
Make sure that both the television and the DVD-
VCR are switched off before connecting the cables.
1
Connect the coaxial cable or SCART as indicated on page 11.
2
Plug the audio output cable into the audio connectors on the
rear of your DVD-VCR.
➢
Respect the colour coding of the left and right channels.
3
Plug the other end of the audio cable into the appropriate input
connectors on your Hi-Fi stereo system.
LINE OUT
L
R
AUD
2
2
COAXIAL
DIGITAL AUDIO OUT
LINE OUT
OPTICAL
L
R
AUDIO
1
LINE O
TV
