Samsung SV-200B, Service Manual

Page: 22 / 72

Disassembly and Reassembly
Samsung Electronics 4-5
4-1-5 Chassis removal
REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) 1
REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) 2
REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) 1
REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) 4
REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) 3
RELEASE 1 TAB 5
RELEASE 1 HOOK 6
A
CONNECTOR BOARD ASS'Y
ASS'Y MAIN
ASS'Y FULL DECK
BOTTOM COVER
FRAME
1. Remove 2 screws holding the bottom cover.
2. Remove 2 screws holding the frame.
3. Remove 2 screws holding the housing assÕy.
4. Remove 2 screws holding the assÕy full deck.
5. Lift the assÕy full deck up.
6. Release 1 tab holding the connector board assÕy.
7. Release 1 hook holding the assÕy main.
8. Lift the assÕy main up to remove.
Note : 1. When removing chassis, take extreme care not to damage the main PCB front.
2. When reinstalling the deck on the main PCB, take extreme care not to damage the sensor.
Fig. 4-5 Chassis Removal