Samsung SUD-2081, User Manual

Page: 31 / 40

English_31
●
SETUP
Y.
w,
PRIVACY : Mask an area you want to hide on the screen,
➊
When the SPECIAL menu screen is
displayed, press the Function Setup switch
so that the arrow indicates ‘PRIVACY’.
➋
Set up the mode using the Function
Setup switch.
AREA : You can select up to 12
PRIVACY areas.
MODE : Determines whether to use
the area selected.
MASK COLOR :
Determine area color. You can select
GREEN, RED, BLUE, BLACK, WHITE and GRAY.
MASK TONE : Adjust the brightness of MASK COLOR.
TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
RETURN : Select this to save the PRIVACY menu settings and return to
the SPECIAL menu.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
➊
When the SPECIAL menu screen is
displayed, press the Function Setup switch
so that the arrow indicates ‘COMM ADJ’.
➋
Set up the mode using the Function
Setup switch.
CAM ID : Determines the camera’s
identifi cation number (between
0 and 255).
BAUD RATE : You can select 2400/480
0/9600/19200/38400/57600 bps.
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
DISP ID : Display camera title on top left corner of the screen.
PROTOCOL : Select the communication PROTOCOL.
(SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH,
HONEYWELL, VICON and PANASONIC)
y
-
-
-
-
-
-
y
-
-
-
-
-
-
PRIVACY AREA SETUP
䯝
1.AREA AREA1
2.MODE OFF
3.MASK COLOR GREEN
4.MASK TONE Â
IIIIIIIIIIIIIIIIIIIII
1
5.TOP
II
Â
IIIIIIIIIIIIIIIIIII
39
6.BOTTOM
IIIII
Â
IIIIIIIIIIIIIIII
79
7.LEFT Â
IIIIIIIIIIIIIIIIIIIII
13
8.RIGHT
III
Â
IIIIIIIIIIIIIIIIII
52
9.RETURN
COMM SETUP
䯝
1.CAM ID Â
IIIIIIIIIIIIIIIIIIIII
1
2.BAUD RATE 9600
3.UART MODE 8-N-1
4.RET PKT ENABLE
5.DISP ID OFF
6.PROTOCOL STW1
7.RETURN