Samsung SUD-2081, User Manual

Page: 17 / 40

English_17
●
INSTALLATION
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring
RS-485 control data.(TIA/EIA-568B)
No. Line Color Camera to Power Supply Power Supply to Receiver
1 White+Orange VIDEO (+)
CH1
VIDEO (+) / RS-485 (+)
2 Orange VIDEO (-) VIDEO (-) / RS-485 (-)
3 White+Green RS485 (+)
CH2
VIDEO (+) / RS-485 (+)
4 Blue POWER (-) VIDEO (-) / RS-485 (-)
5 White+Blue POWER (+)
CH3
VIDEO (+) / RS-485 (+)
6 Green RS485 (-) VIDEO (-) / RS-485 (-)
7 White+Brown POWER (+)
CH4
VIDEO (+) / RS-485 (+)
8 Brown POWER (-) VIDEO (-) / RS-485 (-)
➊
➑
➑
➊
Using the product with third-party UTP peripherals may result in degradation of product function
and performance.
Attenuation and distortion in signal may occur if the maximum transmission distance is
exceeded. Please note that depending on the installation environment/condition, the signal may
become attenuated and distorted and cause the camera to function incorrectly even when the
transmission distance is within the maximum.
If using RS-485 communication please use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P,
BOSCH, HONEYWELL, VICON and PANASONIC Protocol.
If you are using the 1Ch Passive Receiver system setup, please connect the adapter (AC 24V or
DC 12V) directly to the camera.



