Samsung SUD-2081, User Manual

Page: 30 / 40

30_ setup
setup
INT : Internal Synchronization Type
L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select ‘phase’.
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
When the power is DC 12V, the SYNC menu is fi xed to the ‘INT’ mode.
When using RJ-45 Connector, you can’t use the L/L type synchronization.
MOTION DET :
This product has a feature that allows
you to observe movement of objects in
8 different areas on the screen, and the
words 'MOTION DETECTED' appear on the
screen when movement is detected. You
can monitor activity more effi cient.
➊
When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates 'MOTION DET'.
➋
Set up the mode using the Function Setup switch.
SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY
number is high, motion detection sensitivity is increased to
recognize even small movement.
AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
SEL POS : Determines which of the 4 vertices of each MD area is to be
used.
XPOS : Determines the coordinate of the horizontal axis for SEL POS.
YPOS : Determines the coordinate of the vertical axis for SEL POS.
FILL
→
SET : Fills in a selected MD area. The color of fi lling is sequentially
selected as brown, orange, blue, cyan, yellowish green, yellow,
magenta and red.
RETURN : Select this to save the MOTION DET menu settings and return
to the SPECIAL menu.
-
-



y
-
-
-
-
-
-
-
MOTION DET
䯝
1.SENSITIVITY AREA1
2.AREA MODE ON
3.SEL POS L-TOP
4.XPOS Â
IIIIIIIIIIIIIIIIIIIII
3
5.YPOS
III
Â
IIIIIIIIIIIIIIIIII
4
6.FILL
→
SET
7.RETURN